Mbed Technologies
      Our Products @ Your Service


    Introduction: Welcome to Mbed Jobs!. We post appropriate jobs and openings on embedded development, testing and automation to help students and professionals to apply and get hired by the embedded system companies accross the globe. We encourage students and professionals to keep visiting this page on a regular basis and apply for the suitable positions.
 Mbed Job Id: 40
 Job Status: Accepting Applications
 Job Type: Full Time
 Job Duration: Full Time
 Job Responsibilities:
Design and implement software of embedded devices and systems from requirements to production and commercial deployment.
Design, develop, code, test and debug system software.
Analyze and enhance efficiency, stability and scalability of system resources.
Integrate and validate new product feature designs.
Support software QA and optimize Project/Product performance.
Provide post production support.
Interface with hardware design and development.
Assess third party and open source software. 

 Required Skills, Experience and Qualifications:
 Bachelor of Engineering in CSE/ECE/EEE/IS or any other equivalent degree.
Minimum 2 Years Experience in Embedded Software Development.
Solid programming experience in C or C++.
Good knowledge of developing, debugging software on Linux Operating System.
Experience in hands-on development and troubleshooting on embedded targets.
Familiarity with software configuration management tools, defect tracking tools, and peer review.
Strong documentation and writing skills. 


Interested for this Position? Click here to submit your resume.

 Mbed Job Id: 39
 Job Status: Accepting Applications
 Job Type: Contract
 Job Duration: Less than 1year
 Job Responsibilities:
Perform duties as embedded software engineer. 

 Required Skills, Experience and Qualifications:
 Qualification	: B Tech in Computer Science
Experience	: Minimum 2 years of experience
Expertise	: Knowledge of IEEE 12207/DO 178 B Standards
Software testing using LDRA/RTRT
Preparation of Documents as per the standard
Usage of configuration management tools such as ClearCase
Knowledge of MATLAB is preferred 


Interested for this Position? Click here to submit your resume.

 Mbed Job Id: 38
 Job Status: Accepting Applications
 Job Type: Contract
 Job Duration: Less than 1year
 Job Responsibilities:
Perform duties as an embedded FPGA Engineer. 

 Required Skills, Experience and Qualifications:
 Qualification 	: B.Tech in Electronics/ E&C
Experience	: Minimum 2 years of experience
Expertise	: Exposure to Xilinx IDE, Questa SIM, HDL Designer Tool
Expertise in Verification and Validation of FPGA
VHDL/FPGA Code inspection
Exposure to Verilog Libraries preferred 


Interested for this Position? Click here to submit your resume.

 Mbed Job Id: 37
 Job Status: Accepting Applications
 Job Type: Full Time
 Job Duration: Full Time
 Job Responsibilities:
Embedded automotive real-time software engineer.  

 Required Skills, Experience and Qualifications:
 C programming, Microcontrollers(8bit,16bit,32bit), AUTOSAR 3.x/4.x architecture, COM stack, 5+years of experience. 


Interested for this Position? Click here to submit your resume.

 Mbed Job Id: 36
 Job Status: Accepting Applications
 Job Type: Full Time
 Job Duration: Full Time
 Job Responsibilities:
Automotive embedded Software Development for ECU ( Engine , Body, Chassis, Seating, ADAS, and Device Driver Development ( UART ,SPI , I2C , CAN , CAN-FD , LIN and etc.,).
Higher layer Protocols (UDS, J1939, J1850 , KWP2000, OBD etc.,) Development and Integration with Third party Software.
C/C++ Embedded software development on RTOS/Non RTOS platform
Use configuration management tools for code and software documents, change management tools for software error management and EA for software Design
Participate peer reviews for software documents such as requirements, design, test plan and, code reviews, etc.
Involve Unit Testing, Functional and Integration Testing and System Testing
Work with project lead for software deliverables, support for estimates, software metric and SQA
Regular interaction to Systems, and Independent Testing team 

 Required Skills, Experience and Qualifications:
 Primary Skills: 

Mandatory to have Automotive embedded software development experience
Mandatory to have hands on experience in microcontroller (ARM, Renesas, Freescale or
Infineon) based software development using embedded C/ software development experience in C++
Added advantage to have experience in low level driver implementation eg: HWIO, I2C, UART, CAN, ADC, PWM,LIN, Timers etc.
Added advantage for experience of implementing CAN gateway module, UDS diagnostic
Added advantage for AUTOSAR experience
Added advantage for ADAS , ISO26262 experience

Required Skills:

MICROCONTROLLERS
UDS
CAN PROTOCOL
LIN
DEVICE DRIVERS
RTOS 


Interested for this Position? Click here to submit your resume.

 Mbed Job Id: 35
 Job Status: Accepting Applications
 Job Type: Full Time
 Job Duration: Full Time
 Job Responsibilities:
Primary Skills:

Minimum 3 – 8 years of hands on experience in Modeling & Simulation using tools like
Matlab, Simulink, stateflow , s-Function development.( Sound knowledge of complete model based development process.
Autocode generation using ecoder, targetlink.
Experience in Model Verification & Validation, integration testing.
Experience in design and development automotive control units software.
Requirement analysis and design knowledge.
Experience in matlab scripting, perl, python scripting experience will be added Advantage
 

Secondary Skills:

Experience in AUTOSAR architecture, DOOR, PRQA.
MIL Test Systems like TPT, Reactis, M-Test ,MxVDev etc 

 Required Skills, Experience and Qualifications:
 Education: Engineering or Technical degrees preferred (B.E/B.TECH/M.E/M.TECH/MCA/M.Sc)

Experience Required: 3 to 10 years 


Interested for this Position? Click here to submit your resume.

 Mbed Job Id: 34
 Job Status: Accepting Applications
 Job Type: Full Time
 Job Duration: Full Time
 Job Responsibilities:
1+ yrs of experience in Software Verification & Validation
Experience in SDLC, STLC (Software test Life Cycle) with various Software Engineering activities like Requirement Analysis, Development of Test Plans and Testing etc
Automotive Domain Experience
Experience in testing HW/SW systems (black box and white box testing)
Excellent interpersonal and communication skills, strong reasoning, analytical and strategizing skills
Experience in different testing tools for static analysis, unit and integration testing
Knowledge of MISRA C:2012 Coding Standard 

 Required Skills, Experience and Qualifications:
 Education: Engineering or Technical degrees preferred (B.E/B.TECH/M.E/M.TECH/MCA/M.Sc)

Experience Required: 1 to 10 years 


Interested for this Position? Click here to submit your resume.